IC Plus - Blog

Upgrade Coax cable for IP Cameras, Effortlessly with the IP01!

Written by Martin Griffin | 08-Feb-2023 16:10:19

IP01 is an Ethernet extender that can use coaxial cable to send IP signal without replacing existing cable, which can smoothly upgrade your CCTV system at lowest cost.

 

Effortlessly Turn Analog into IP Cam without Concern about the Wiring Budget



Compared to analog CCTV cameras having relatively slow progress in their technology, IP ones are more promising and much more flexible for surveillance use.

However, you will probably concern about the cost of the upgrade. The old and expensive coaxial cable can not be used anymore. You don't know what to do with unused coaxial cables, other than throwing them away. Then, you might start thinking can I use coaxial cables for my new CCTV system?

The answer is YES! SC&T's IP01 is the product that solves your problem with a small budget and a  great result.

 

What is IP over Coaxial?

The IP over coaxial is a technology that can use coaxial cable to transfer IP signal, helping you upgrade CCTV camera from analog to IP without replacing existing cables. IP01 uses such technology and acts as an IP to coaxial converter to send a CCTV video from its transmitter to its receiver.

*Warning: IP01 does not support PoE transmission. 

 

Estimate Distance (Max 300M for RG6U Cables)

You can find the suggested transmission length by different cables. Please read thoroughly before use.

  • The testing is performed using CommScope 75Ω RG59/ RG6U coaxial cables.
  • Compliant with IEEE802.3 and IEEE802.3u.

* Ensure the old cable has enough length

 

Easy Installation

Easily connect the transmitter to the camera and the receiver to an NVR and finish the installation.

* Make sure the cable is in a good condition before installation

 

Compact Size

IP01 is 6.4cm in length, easy to be installed in any environment.